Reducing Joiners.
Joins 2 Different size poly pipes.

  • 19mm x 13mm Barb
  • 25mm x 13mm Barb
  • 25mm x 19mm Barb

Take-Offs.
The shorter end is inserted into a grommet to provide a perfect seal.

  • 13mm Barb x 13mm
  • 19mm Barb x 19mm

Grommets.
Rubber grommets are used in conjunction with take-off fittings to provide a small diameter poly pipe branch from a large supply pipe. The grommets fit inside a hole drilled in the supply pipe.

  • 19mm ID Curved Flange
  • 13mm ID Top Hat
  • 19mm ID Top Hat

End Plugs.

  • 13mm Barb
  • 19mm Barb
  • 25mm Barb

Tees.
Used to branch poly pipe of the same size.

  • 13mm Barb
  • 19mm Barb
  • 25mm Barb

Reducing Tees.
Used to branch poly pipe of different sizes.

  • 19mm x 13mm Barb
  • 25mm x 13mm Barb
  • 25mm x 19mm Barb

Tees - Barb x Female.
Provides a branch with a female thread. Mostly used with articulated risers & pop-ups, or poly prop risers & shrub Adapters.

  • 19mm x ½" BSP
  • 25mm x ½" BSP

Tees - Barb x Male.
Mostly used for direct connection to pop-up lawn sprinklers.

  • 13mm x ½" BSP
  • 19mm x ½" BSP
  • 19mm x ¾" BSP
  • 25mm x ½" BSP
  • 25mm x ¾" BSP

 

Elbows.
Used to create corners in poly pipe.

  • 13mm Barb
  • 19mm Barb
  • 25mm Barb

Elbows - Barb x Female.
Provides a bend with a female thread. Has the same use as the female threaded tee, but it is used at the end of a line.

  • 19mm x ½" BSP
  • 25mm x ½" BSP

Elbows - Barb x Male.
Provides a bend with a male thread. Has the same use as the male threaded tee, but it is used at the end of a line.

  • 13mm x ½" BSP
  • 19mm x ½" BSP
  • 19mm x ¾" BSP
  • 25mm x ½" BSP
  • 25mm x ¾" BSP

Corner Elbows Male
Provides a branch with a male thread and a bend for the supply pipe. Ideal for pop-up sprinklers placed in corners.

  • 19mm x ½" BSP

Directors Barb x Male
Connects poly pipe to female threaded outlets. Mostly used to connect poly pipe to a threaded pressure pipe fitting, tank outlet or valve.

  • 13mm x ½" BSP
  • 13mm x ¾" BSP
  • 13mm x 1" BSP
  • 19mm x ½" BSP
  • 19mm x ¾" BSP
  • 19mm x 1" BSP
  • 25mm x ¾" BSP
  • 25mm x 1" BSP

In-Line Valve
Used to isolate or regulate water supply. Recommended at the end of poly pipe lines to flush the system and remove buildup contaminants.

  • 13mm Barb

In-Line Valves with O-Rings
High performance in-line valves that incorporate o-rings to ensure sealing at both high and low pressure. Full flow design ensures minimal pressure losses.

  • 19mm Barb
  • 25mm Barb

Threaded In-Line Valves with O-Rings
Same performance as the Barb In-Line Valve with O-Rings, but with a combination of threads or barbs. Suitable for a variety of applications

  • 19mm x ½" BSP Male
  • 19mm x ¾" BSP Male
  • 25mm x 1" BSP Male
  • ½" BSP Male
  • ¾" BSP Male
  • 1" BSP Male

 

 

In-Line Filters
Connects to poly tube to filter out particles in the water supply. Removable filter for cleaning.

  • 13mm Barb
  • 19mm Barb
  • 25mm Barb

Pressure Reducer 4:1
Used to reduce water pressure in 13mm poly pipe. Maintains correct dripper flow or prevents sprays from "Misting" at high pressure.

  • 13mm Barb

Ratchet Clips
Used on all home irrigation fittings to secure fittings into poly pipe. Recommended on every connection.

  • 13mm Pipe
  • 19mm Pipe
  • 25mm Pipe

Pipe & Cable Ties
Convenient ties for all irrigation, cable and domestic uses. Release tab allows the ties to be removed and re-used.

  • 150mm
  • 200mm
  • 300mm

Saddle Clamps
Used to attach poly pipe to fences and walls in garden areas. Screws or nails not included.

  • 13mm
  • 19mm

Saddle Clamp with Nail.

  • 13mm Pipe

Nuts & Tails
Screws onto a tap outlet and joins to poly pipe.

  • ¾" BSP Nut x 13mm Tail
  • ¾" BSP Nut x 19mm Tail
  • 1" BSP Nut x 19mm Tail
  • 1" BSP Nut x 25mm Tail

Reducing Bush
Allows a 1" tap fitting to connect to a ¾" tap outlet.

  • 1" BSP M x ¾" BSP F

Universal Adaptor
Converts 1" tap outlet to ¾" tap outlet.

  • Plastic 1" BSP F x ¾" BSP Male.
  • Brass 1" BSP F x ¾" BSP Male.

Blank Nuts with Washers
Provides a seal at the end of a male BSP threaded fitting.

  • ¾" BSP
  • 1" BSP

Washers
Replacement washers for all tap fittings and nuts.

  • ¾" BSP Nut
  • 1" BSP Nut

Clip-on Joiner with Bug Cap
Clicks on to 12mm hose connectors and joins to poly pipe. Bug cap keeps out ants and insects when not in use.

  • 13mm Barb
  • 19mm Barb

Poly to Poly Connector
Clicks onto 12mm hose tap adapters and joins to poly pipe.

  • 13mm Barb x 12mm Click-on
  • 19mm Barb x 12mm Click-on

Elbows M x F
Used to create corners in threaded fittings. Mostly used to make articulated risers for use with pop-up sprinklers.

  • ½" BSP
  • ¾" BSP
  • 1" BSP

Couplings
Used to join 2 male threaded fittings of the same size.

  • ½" BSP Female
  • ¾" BSP Female
  • 1" BSP Female

Aqua Shuttle
Used to distribute water via 4mm riser tube to a cluster of plants. ¾" BSP male thread inlet and six 4mm barb outlets, each controlled with their own valve to adjust the water to each line. The Aqua Shuttle provides total control and flexibility. Use any combination of drippers and sprays and adjust the watering for all plants.

Back to Back Nut
Connects two Aqua Shuttles together for additional watering applications, or used to adapt Aqua Shuttle to ¾" tap outlets.

Tub Outlets
Suits a range of water reticulation applications in the hydroponics and nursery industries.

  • 13mm
  • 19mm
  • 25mm
  • Screen
  • Extension

© Steve Cselka 2002 - 2010